Fitting a cat flap can seem intimidating but it's simple with the right instructions. Determine how high you would like the flap to be (normally it's located at belly height). Then, mark this area on your door and use the template provided as a guide when drilling.

If you have a kitten who is still a newborn then gently prop the door slightly open and invite it to walk through. Reward it when it goes through.

Take a measurement of the door

A cat flap lets your pet to go in and out of your home at any time. This can keep your cat healthy since it will ensure that it gets enough exercise and will also allow it to go back inside when it gets trapped outside in bad weather. This will reduce the amount of time you allow your cat flap installation bristol out or in and make your home secure by notifying you when it has left.

It is important to make sure that the cat flap is set up properly to stop your pet from being pushed through or cat flap fitting escaping through it by other animals (e.g. dogs). It is important to measure the height of your pet's belly and the entrance to your home in order to ensure that the flap is at the right height. If your cat is a little taller or shorter than average, you can adjust the flap's height by moving it up or down by a tiny amount.

The next step is to use a spirit level to mark the centre of the door that you will be installing the flap. Then, using the markings as a guideline, cut out the form of the flap on the door with the help of a jigsaw. Once you've cut the area, sand the edges of the door to smooth the surfaces. Then drill any fixing holes that are required.

fitting cat flap in upvc door panel a cat flap should not take longer than two hours. The process is slightly more difficult if you have to put it in the form of a uPVC door or composite one. This is because composite doors are available in a variety of thicknesses, which can affect the way holes are cut. This is why we recommend calling a professional to complete the work, particularly when you've never dealt with glass before.

Measure Your Cat

A cat flap can spare you from hearing your pet's cries for you to let it in or out. This is especially helpful if you are at working all day and your cat is in the house waiting for you to get home in any weather.

It is essential to measure your cat first before you attempt the installation. It might appear to be a simple task, but it is crucial to get the measurements right. Otherwise, your pet may find it difficult to use.

First, ensure that your cat is calm and not stressed before you take the measurements. You'll need to put your cat in a place where they cannot move. Also, ensure that the measuring tape is straight and not bent against their body. You can take a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.

Once you've determined your cat's measurements, it's time to look at the door to determine where to place the flap. It is advisable to place the flap on the highest point of your cat's belly as this will help them to pass through it without much effort. This will also prevent the flap making quite a lot of noise when it swings open and closed.

You should also consider the thickness and structure of the uPVC door or composite. While timber doors are all of the same thickness, uPVC and composite doors are different in their overall construction, which can make fitting a cat flap more complicated because you must ensure that the hole you cut is the right size for your pet.

You can make use of the template included in the instructions to mark the location of the hole on the door. This will allow you to determine where the hole should be placed and ensure that the template is set precisely on the door. Using a spirit level to make sure that the template is right against the door will also be very helpful.

Cut the Flap

Before you can put in your cat flap you have to cut the door panel to make a space big enough for it. This can be a tricky job and it is recommended that you get help from a professional cat flap fitting service for this step should you not have the knowledge or skills to tackle it yourself. You can also consult the instructions that come with the kit to discover how to do it properly.

You can take the height of the cat's or kitten's stomach as a reference. In general, place the cat flap approximately 10-15 centimeters above the ground. This is the typical height of the belly for cats. Your cat will be able to go through the flap comfortably and it will also give the other cats or neighbours who are snooping a tough time trying to get in or out.

Once you've determined the location where the cat flap needs to be positioned, mark this location on the door using the help of a pencil. If your kit includes an outline you can place it on the door. Use the marks on the template to drill holes in each corner. Then, you should be able to cut out the template shape and replace it with the cat flap.

You can put in your cat flap yourself inside a wood or upvc door panel with cat flap fitted door when you're confident with the use of a Jigsaw. Be sure not to cut through the mullions or rails that run vertically of your door. You can use a jigsaw to cut your panel into a circle or square, depending on how you'd like to cut it. Be patient and don't try to try to force the jigsaw to cut faster.

Once the hole is made, carefully fit the flap onto its new home and ensure that it's securely secured. If it features caps on the screws, then place these onto the screws that protrude. Once the screws have been installed, sand the rough edges and apply sealant to any gaps. This will block drafts from entering your home.

Fit the Flap

If you have a simple cat flap, you can open it and encourage your pet to go through by placing a small amount of cat food in the front of the door. Alternatively you can try pushing the cat through with your hand or a stick. Once your cat flap fitters near me is used to moving through the flap, it will be able to move in and out as it wishes so you can let it in or out without holding the door open to allow it in all day (and likely in any weather).

It is possible to install the flap inside a UPVC door or a glass door, but it may not be as simple as putting one on a wooden external door. This is because the doors made of UPVC and some kinds of glass doors do not have an even thickness. This can affect the way you cut the hole for the flap and will also affect whether the flap is fitted correctly after it has installed.

The mounting kit may contain a template that outlines where to drill holes. If the kit doesn't include a template you can make one yourself. When cutting, it is important to avoid pushing the jigsaw too far enough to make a larger hole than you need in your door.

Some cat flaps are available in circular designs, which are more difficult to install. If you have a round flap, make sure the hole is in the correct spot on the door. In the event that it is not, the cat may not be able use it, and might be locked outside for the entire day (or at night).

Certain cat flaps for french doors flaps come with locks that let you determine when your cat is allowed to enter and leave. This is useful when your cat is scared of going out in the dark or coming back to the house at night. They are also useful if you work all day. The lock can be used to allow or cat flap fitting deny entry, and some are locked in both directions, permitting you to close the door completely, which is especially helpful for sick or elderly cats who aren't keen on going out in bad weather.